This article is from a FAQ concerning SCO operating
systems. While some of the information may be applicable to any OS,
or any Unix or Linux OS, it may be specific to SCO Xenix, Open
This is an old article about reading PCI information SCO Unix and is only left here for historical purposes.
There is lots of Linux, Mac OS X and general Unix info elsewhere on
this site: Search this site is the best
way to find anything.
First, you probably don't need to. This usually comes up because
a network card isn't working and you think that you must have the
wrong pci information. More likely, you just don't have the most
current driver- for example, Intel Pro100 cards are very apt to
need a new driver(check ftp://stage.sco.com/pub/drivers).
However, if you really do need this information "hw -r pci" will
tell you everything you need to know and more. The "hw"
command was not included with 5.00 and 5.0.2, but can be obtained
from ftp://ftp.jpr.com. It will
also work on 3.2v4.2.
Got something to add? Send me email.
Increase ad revenue 50-250% with Ezoic