This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.
This is an ancient post with no relevance to modern systems.
You will need MMDF II level 43 for this; it's included in Unix 3.2v4.0 and ODT 2.0 and above, and is available in tls011 for older releases. You will need to add a confstr= entry to your UUCP channel similar to
MCHN uucp, show="SCO UUCP Delivery", que=uucp, tbl=uuchn, ap=same, pgm=uucp, mod=imm, confstr="naddrs=15 maxlen=1024"
naddrs sets the maximum number of addresses per
maxlen sets the maximum total length of the address
You probably want to set maxlen no higher than 1024 or you may run into a limit in the system. You may also want to configure your badhosts channel similarly.
If you found something useful today, please consider a small donation.
Got something to add? Send me email.