# # (SCO Unix) Why does the installation bomb out with a 'Signal 8' error?
APLawrence.com -  Resources for Unix and Linux Systems, Bloggers and the self-employed


I've removed advertising from most of this site and will eventually clean up the few pages where it remains.

While not terribly expensive to maintain, this does cost me something. If I don't get enough donations to cover that expense, I will be shutting the site down in early 2020.

If you found something useful today, please consider a small donation.

Some material is very old and may be incorrect today

© December 2003 (various)

This article is from a FAQ concerning SCO operating systems. While some of the information may be applicable to any OS, or any Unix or Linux OS, it may be specific to SCO Xenix, Open There is lots of Linux, Mac OS X and general Unix info elsewhere on this site: Search this site is the best way to find anything.

Why does the SCO Unix installation bomb out with a "Signal 8" error ?

Imagine: 32MB was a lot of RAM!

Contributed by Roberto Zini

Under SCO OpenServer 5.0.5 this is mainly a symptom of a memory problem. In the "SCO OpenServer 5.0.5 Release Notes" booklet, SCO states that your system must have at least 32MB of RAM to succesfully install OpenServer. If you have less, the following message is likely to appear on the screen:

 Reading from install source 10 Kb/ramFs/extractProd/extractAll
 terminated by signal 8

To solve this problem on a 16MB system, you can restart the installation and type the "notebook" strings while at the boot prompt. Alternatively, reinstall the system by typing the following at the boot prompt:

 defbootstr nbuf=100

If you found something useful today, please consider a small donation.

Got something to add? Send me email.

(OLDER)    <- More Stuff -> (NEWER)    (NEWEST)   

Printer Friendly Version

-> (SCO Unix) Why does the installation bomb out with a 'Signal 8' error?

Inexpensive and informative Apple related e-books:

Take Control of Automating Your Mac

Digital Sharing Crash Course

Take Control of iCloud

Take Control of OS X Server

Take Control of High Sierra

Printer Friendly Version

Have you tried Searching this site?

This is a Unix/Linux resource website. It contains technical articles about Unix, Linux and general computing related subjects, opinion, news, help files, how-to's, tutorials and more.

Contact us

Printer Friendly Version

Unlike info, pinfo does not display anything if it has nothing. I've been forever irritated by info coming up with its default page when it has nothing to tell me. (Tony Lawrence)

Linux posts

Troubleshooting posts

This post tagged:



Unix/Linux Consultants

Skills Tests

Unix/Linux Book Reviews

My Unix/Linux Troubleshooting Book

This site runs on Linode